5LT MD4 MAINTENANCE MORRIS BOX = 4

Part No 90-549 Off Road Only
5LT MD4 Maintenance Morris.
MD-4 is a damp start and penetrating fluid with outstanding corrosion protection properties. When applied to wet parts the chemistry of MD-4 has a powerful attraction to the underlying surfaces and this completely displaces traces of water. Therefore this product is particularly useful as an

engine damp start. If the aerosol pack is used, a short spray on to the affected parts will displace any wetness and prevent voltage breakdown, allowing the engine to be started again normally. MD-4 is also an effective penetrating fluid for freeing all seized and corroded metal parts. It has been designed with a very low surface tension, which gives it excellent penetrating power, and this, coupled with superior solvent and lubricating properties enables the most inaccessible corr 90-550" grease like coating on all parts. This coating has powerful anti-fling properties and is not displaced by the fast movement of the chain. Chain and sprocket wear is reduced to a minimum by the lubricant coating.
Applications
MLR Chainlube is recommended for use on motorcycle chains, lift and drive chains, leaf and roller chains, conveyor

residual oil film acts as a rust and corrosion preventative on the disassembled parts and helps reassembly.
1. As a damp start. One short spray (aerosol) of 2-3 seconds on the plugs, leads, and distributor cap will displace moisture and allow starting.

2. As a penetrating oil. Heavily corroded and seized parts